STRETCH WRAPPING MACHINES

Showing all 11 results

Working System – RSS, It is mounted in the most suitable point in the operation. – The pallet to be lifted is placed on the machine platform using the forklift or pallet truck by the operator. -The stretch is manually secured to the bottom of the pallet and the start button is pressed. – The […]

Working System – MSS,It is installed in any building line or in its own steel column. – The product to be removed is placed in the winding area by the operator and the stretch is manually fastened to the lower part. – The operator leaves the winding area and presses the start button to start […]

Working System – Pallet to be wrapped is put on the wrapping area by the pallet operator and the stretch film is manually affixed to its bottom – Stepping out of wrapping area, start button is pressed and the machine is started. – Wrapping, started from the bottom, continues up to the top and goes […]

Working System -Mxss The palletizing line is mounted behind the conveyor. – The pallet from the exit conveyor is automatically inserted. – The incoming pallet is lifted by the lifting mechanism to start wrapping the pallet at the bottom. – The winding starts from the bottom to the top and continues to the bottom again […]

30 Pallet / Hour – Returning Conveyor (Rev Con Stretch Wrapping RxSS) Working System Rxss The palletizing line is mounted behind the conveyor. – The pallet from the exit conveyor is automatically inserted. – The incoming pallet is lifted by the lifting mechanism to start wrapping the pallet at the bottom. – The winding starts […]

-Jmss The palletizing line is mounted behind the conveyor. – The pallet from the exit conveyor is automatically inserted. – The incoming pallet is lifted by the lifting mechanism to start wrapping the pallet at the bottom. – The winding starts from the bottom to the top and continues to the bottom again – At […]

-Mgss The palletizing line is mounted behind the conveyor. – The pallet from the exit conveyor is automatically inserted. – The incoming pallet is lifted by the lifting mechanism to start wrapping the pallet at the bottom. – The winding starts from the bottom to the top and continues to the bottom again – At […]

– The stretch wrapping machine is mounted at the back of output conveyor. – The pallet coming from output conveyor is automatically stopped, and the label containing the data obtained from the system or programmed manually is bonded. – Once the label is bonded, the reader on the returning arm confirms the operation and transmits […]

Working System – The automatic stretch wrapping machine wraps normally to the point where the pallet of lasso throwing is desired. -When it comes to lasso throwing cycle, the lasso system enters the circuit to form a stretch lasso and continues to wrap to the point where it is desired to be wrapped as a […]

Working System – The automatic stretch wrapping machine stops after wrapping the pallet to the upper middle point. – The upper film system serially overlays the previously prepared nylon film pallet. – After the cycle is over, the system is retracted and the rotary arm starts to rise again, then goes down from the top […]

Working System – Jumbo stretch ball is attached to the shaft feeding. – The transferring roll is attached to the transfer shaft and the jumbo roller is wrapped around the bottom roller – The machine is started by pressing the Start button. – It automatically stops after a specified time in time-adjusted systems (used for […]